Items where Author is "Shneen, Salam Waley"

Article

Shneen, Salam Waley (2026) Study, Design, Modeling, Simulation, and Control Analysis of AC-AC Power Converters. Journal of Fuzzy Systems and Control, 3 (3). pp. 259-266.

Shuraiji, Ahlam Luaibi and Hameed, Kassim Rasheed and Shneen, Salam Waley (2026) Investigation of Manufacture Tolerances on Torque Pulsation Profile of Interior Permanent Magnet Motor with Third Harmonic Injected Sinusoidal Rotor Iron Pole. Buletin Ilmiah Sarjana Teknik Elektro, 8 (1). pp. 141-150.

Shneen, Salam Waley (2026) Study, Design, Modeling, Simulation, and Control Analysis of DC-DC Power Converters. Journal of Fuzzy Systems and Control, 3 (3). pp. 239-249.

Shuraiji, Ahlam Luaibi and Shneen, Salam Waley (2025) Analysis of Improve Performance and Dynamics of an Induction Motor using an Artificial Neural Network Controller and a Conventional Proportional Integral Derivative Controller. Buletin Ilmiah Sarjana Teknik Elektro, 7 (3). pp. 397-408.

Ibrahim, Luay G. and Shneen, Salam Waley (2025) Design and Implementation of PID Controller for Phase Shifted Full Bridge DC-DC Converter. Buletin Ilmiah Sarjana Teknik Elektro, 7 (3). pp. 362-381.

Shneen, Salam Waley and Oleiwi, Fadhil Mahmood and Dahloos, Jaber. O. (2025) A Study of Simulation and Modeling of Three-Phase Electric Transformers. Journal of Fuzzy Systems and Control, 3 (2). pp. 128-134.

Abdullah, Zainab B. and Shneen, Salam Waley and Dakheel, Hashmia Sharad (2025) Performance Enhancement of BLDC Motor Drive Systems Using Fuzzy Logic Control and PID Controller for Improved Transient Response and Stability. International Journal of Robotics and Control Systems, 5 (2). pp. 1552-1570.

Kareem, Tamarah and Shneen, Salam Waley and Al-Abbasi, Mohammed (2025) Design and Implementation of Proportional-Integral Controller for Single Phase Stand-Alone Inverter with an LC-Filter. International Journal of Robotics and Control Systems, 5 (2). pp. 1498-1518.

Ibrahim, Luay G. and Shneen, Salam Waley (2025) Study and Analysis of Adaptive PI Control for Pitch Angle on Wind Turbine System. International Journal of Robotics and Control Systems, 5 (2). pp. 1331-1347.

Gaber, Rajaa Khalaf and Shneen, Salam Waley and Jiaad, Suaad Makki (2025) Study and Analysis of PWM with DC-DC Converter for Inverting Buck-Boost Inverter Topology. International Journal of Robotics and Control Systems, 5 (2). pp. 1029-1050.

Nadhim, Rasha F. and Oudah, Manal Kadhim and Aziz, Ghada Adel and Shneen, Salam Waley (2025) Improving TCP/AQM Network Stability Using BBO-Tuned FLC. International Journal of Robotics and Control Systems, 5 (2). pp. 763-780.

Oudah, Manal Kadhim and Shneen, Salam Waley and Aessa, Suad Ali (2025) Reduction of Large Scale Linear Dynamic MIMO Systems Using Adaptive Network Based Fuzzy Inference System. International Journal of Robotics and Control Systems, 5 (2). pp. 678-697.

Omran, Salman Hussien and Shneen, Salam Waley and Ali, Moaz H. and Jawad, Qusay A. and Gitaffa, Sabah A. and Salman, Hayder Mahmood (2024) Comparative Traditional Methods of Attributes with Fuzzy Quality Control Charts for Improving the Quality of a Product. Journal of Fuzzy Systems and Control, 3 (1). pp. 22-29.

Aziz, Ghada Adel and Abdullah, Fatin Nabeel and Shneen, Salam Waley (2024) Performance Enhancement of DC Motor Drive Systems Using Genetic Algorithm-Optimized PID Controller for Improved Transient Response and Stability. International Journal of Robotics and Control Systems, 5 (1). pp. 266-295.

Al-Dabbagh, Zainab Ameer and Shneen, Salam Waley (2024) Design of a PID Speed Controller for BLDC Motor with Cascaded Boost Converter for High-Efficiency Industrial Applications. International Journal of Robotics and Control Systems, 5 (1). pp. 22-46.

Shneen, Salam Waley and Juhi, Hasan H. and Najim, Hiba Ali (2024) Simulation and Modeling with Designing for the Proportional, Integral and Derivative Control of Industrial Robotic Arm by Using MATLAB/Simulink. International Journal of Robotics and Control Systems, 4 (4). pp. 2073-2094.

Shneen, Salam Waley and Alkhasraji, Jafaar M. Daif and Sulttan, Mohammed Q. (2024) Internet-based Control of Thermo-optical Plant Improvement based on the PID-GWO System. Journal of Fuzzy Systems and Control, 2 (3). pp. 197-202.

Hafad, Sanaa A. and Hussin, Shemaa A. and Hmood, Abdalkalaq F. and Mahdi, Raghad R. and Shneen, Salam Waley (2024) Characterization of Tensile Strength and Degradation of Polymer Blend Reinforced with Black Carbone. Journal of Fuzzy Systems and Control, 2 (3). pp. 160-163.

Shneen, Salam Waley and Abdullah, Zainab B. and Dakheel, Hashmia S. (2024) Design and Implementation of Voltage Source Inverter Using Sinusoidal Pulse Width Modulation Technique to Drive A Single-Phase Induction Motor. International Journal of Robotics and Control Systems, 4 (4). pp. 1527-1546.

Al-Dabbagh, Zainab Ameer and Shneen, Salam Waley and Hanfesh, Abduljabbar O. (2024) Fuzzy Logic-based PI Controller with PWM for Buck-Boost Converter. Journal of Fuzzy Systems and Control, 2 (3). pp. 147-159.

Omran, Salman Hussien and Shneen, Salam Waley and AL-Khafaji, Mohanned M. H. (2024) Beta-Deficient Estimators with Truncated Sampling Plan in Quality Control for the Auto Battery Industry. Journal of Fuzzy Systems and Control, 2 (2). pp. 81-86.

Aessa, Suad Ali and Ali, Ekbal Hussain and Shneen, Salam Waley and Abood, Layla H. (2024) Adaptive Fuzzy Filter Technique for Mixed Noise Removing from Sonar Images Underwater. Journal of Fuzzy Systems and Control, 2 (2). pp. 45-49.

Abdullah, Fatin Nabeel and Aziz, Ghada Adel and Shneen, Salam Waley (2023) GWO-PID of Two-phase Hybrid Stepping Motor for Robotic Grinding Force. Journal of Fuzzy Systems and Control, 1 (3). pp. 71-79.